Unique Polymer Systems ‘Standard Resin and Hardener’
CHARACTERISTICS
Unique Polymer Systems ‘Standard Resin and Hardener’ is a high performance, solvent free epoxy system designed for onsite repairs to metal, wood, glass and synthetic materials. Unique Polymer Systems ‘Standard Resin and Hardener’ consists of a unique blend of epoxy resin combined with polyaminoamine adducts, which have been specifically selected to provide the optimum adhesions and mechanical and physical strength.
APPLICATION
Unique Polymer Systems ‘Standard Resin and Hardener’ is simple and easy to use and when used in conjunction with Unique Polymer Systems reinforcement products such as glass cloth, glass tapes or glass mat will result in an excellent repair medium having inherent strength and integrity.
Theoretical Coverage Rate
0.6 m²/unit at 200 microns dft. (12.75 ft²/unit at 4 mils dft).
Recommended Film Thickness
Wet 100 microns (4 mils)
Dry 100 microns (4 mils)
PHYSICAL CONSTANTS
Mixing Ratio Base Activator
Mixing Ratio |
Base |
Activator |
|
|
2 |
1 |
By volume |
Appearance |
Base Activator |
Clear Liquid Clear Liquid |
|
Drying & Cure times at 20°C (68°F)
Usable Life |
30 minutes |
Touch Dry |
2 hours |
Hard Dry Minimum |
16 hours |
Overcoating Maximum |
2 hours |
Overcoating |
24 hours |
Full Cure |
7 days |
These times refer to Unique Polymer Systems ‘Standard Resin and Hardener’ only. When the product is blended for other uses, times will be extended and will depend on the final quantities of the mix.
Volume solids - 100%
V.O.C – Nil
Shelf life
Use within 5 years of purchase. Store in original sealed containers at temperatures between 5°C (40°F) and 30°C (86°F).
Maximum working temperature
(in conjunction with glass tape) 170°C (338°F)
The maximum working temperature in conjunction with sealer/filler resin mix is 180°C (356°F)
PHYSICAL PROPERTIES
Hardener’ Compressive Strength ADTM D695 |
1019 kg per cm² (14500psi) |
Flexural Strength ASTM D790 |
956 kg per cm² (13600psi) |
Tensile Strength ASTM D4060 |
633 kg per cm² (900psi) |
* Low Pressure Repair |
35kg/cm² (500psi) |
* High Pressure Repair Bandage |
112kg/cm² (1600psi) |
*(See application manual for full details)
HEALTH AND SAFETY
As long as normal good practice is observed Unique Polymer Systems 'Ceramic Carbide Paste' can be safely used. Protective gloves should be worn during use. A fully detailed Material Safety Data Sheet is either included with the material or is available on request.
PACKAGING
Supplied in 225g and 5kg packs.