Herstellingstape voor buizen van Unique Polymer Systems
KENMERKEN
De 'Pipe Repair Tape' (herstellingstape voor buizen) van Unique Polymer Systems is een hoogpresterende, snel uithardende, door vocht geactiveerde herstellingsband, speciaal ontwikkeld voor de herstelling van lekkende buizen, die geactiveerd wordt door onderdompeling in water.
TOEPASSING
Herstellingstape voor buizen van Unique Polymer Systems is ideaal voor het herstellen van buizen in systemen onder lage druk. Als een algemene vuistregel zal een herstelling opgebouwd tot op een dikte van ongeveer 12 mm (½”) bestand zijn tegen een bedrijfsdruk van 10 bar (150 psi). Een hogere druk, tot 50 bar, kan worden verkregen door eerst een 'stop' van afdichtkit aan te brengen zoals hierin beschreven, naar goeddunken van de gebruiker. Buizen tot een nominale diameter van 400 mm kunnen worden hersteld dor gebruik te maken van de herstellingstape voor buizen van Unique Polymer Systems (zorg ervoor dat de juiste bandmaat wordt gebruikt) met gaten met een diameter van ongeveer 3 mm tot 6 mm.
PHYSICAL CONSTANTS
Mixing Ratio: Supplied ready to use
Appearance: Resin impregnated bandage
Drying & Cure times at 20°C (68°F)
Usable Life |
2-3 minutes |
Initial Set |
5 minutes |
Full Mechanical |
30 minutes |
Strength |
|
Volume Solids |
100% |
V.O.C |
Nil |
Shelf life
Use within 12 months of purchase. Store in original sealed containers at temperatures between 5°C (40°F) and 30°C (86°F).
Drinking water
Product that may be used with drinking water.
PHYSICAL PROPERTIES
Flexural Strength ASTM D790 |
32 N/mm2 (4640psi) |
Tensile Strength ASTM D6382 |
19 N/mm2 (2755psi) |
Hardness (Shore D) ASTM D785 |
82 |
Adhesion (Bond Strength) |
14 N/mm2 (2000psi) |
Maximum Heat Resistance ASTM D648 |
270°C (500°F) |
Maximum Service Pressure |
(½ inch/12 mm thick repair) 10 bar (150psi) (1 inch/25 mm thick repair) 27.5 bar (400psi) |
HEALTH AND SAFETY
As long as normal good practice is observed Unique Polymer Systems ‘Pipe Repair Tape’ can be safely used. Keep skin contact to a minimum. Use barrier cream or disposable gloves. Wash off areas of contact with soap and water. A fully detailed Material Safety Data Sheet is either included with the material or is available on request.
PACKAGING
UPS19601 50mm x 1.5m – Nominal Bore > 100mm
UPS19603 50mm x 3.6m – Nominal Bore > 200mm
UPS19604 75mm x 3.6m – Nominal Bore > 300mm
UPS19605 100mm x 3.6m – Nominal Bore > 400mm
UPSPWSK Small Pipe Wrap Kit Contents
UPS19601 –5 off +
1-off Metal Putty Stick