Nut Style Multi-Jackbolt Tensioners - Standard Series
Nut style Multi-Jackbolt Tensioners from Superbolt® are an innovative bolting product that will eliminate expensive and dangerous tooling. Only hand/air tools are required to install or remove any size Torquenut™.
Below are a few of the series available.
MT Torquenut™
|
Uses: Standard Multi-Jackbolt Tensioner.
Operating Temp: -50ºF to 500ºF
Description: MT tensioners are used on general mechanical applications. They can be used on high or medium strength bolts and studs and will fit in the same area as a heavy hex nut. The MT series features hex-head jackbolts.
Application Examples: General machinery, mining equipment, anchorbolts, gear boxes, pinion stands, tables, crushers, engines, compressors, presses, etc.
|
CY Torquenut™
|
Uses: Higher strength alternaitve to MT Tensioner.
Operating Temp: -150ºF to 500ºF* (*additional material testing required for low temperature service)
Description: CY series tensioners are used for higher bolt loads on general machinery applications. They fit in the same area as a heavy hex nut.
Application Examples: Semi-cryogenic bolting, compressors, pumps, high pressure flanges, pinion stands, gear reducers, gear boxes, split gears, crushing equipment, presses, and military equipment.
|
MTSX Torquenut™
|
Uses: For higher preload needs, extra high strength.
Operating Temp: -50ºF to 500ºF
Description: MTSX Torquenuts provide extremely high preloads on large bolts or studs. Relatively little jackbolt torque is required by using JL-M lubricant.
|
SJX Jamnuts
|
Operating Temp: -50ºF to 500ºF
Description: SJX Jamnuts are used for applications where limited headroom and/or limited thread engagement are required. On request jamnuts are available with Superbolt's® patented captive set screws.
Application Examples: Hydraulic cylinders, shaft mounts, pipe flanges, and inaccessible places.
|
SMX Mill Motor Nuts
|
Operating Temp: -50ºF to 500ºF
Description: SMX Mill Motor Nuts are used to replace standard mill motor armature nuts supplied by electric motor manufacturers. SMX tensioners are available for most standard motor frame sizes.
Application Examples: Mill motor nut on brake wheel.
|
NI Bearing Locknuts
|
Operating Temp: -50ºF to 500ºF
Description: NI bearing lock nuts are directly interchangeable with standard AN and N series locknuts. Bearing locknuts are ideal for jacking bearings into place. They can also clamp entire shaft assemblies.
Application Examples: Common bearings.
|
MTA - Armored
|
Operating Temp: -50ºF to 500ºF
Description: Superbolt® Armored Torquenuts™ are used primarily for rough service environments. The jackbolts are recessed in the nut or bolt body protecting them from flying debris or rotating parts.
Application Examples: Mining equipment, anchorbolts, gear boxes, pinion stands, tables, crushers, engines, compressors, presses, etc..
|